*
*
*
*
*
*
*
*
低压发泡机系列
返回列表
LD-602D-Z系列聚氨酯灌注机
LD-602D-Z super flow low pressure foaming machine

一、 概述

LD-602D-Z系列聚氨酯灌注机是生产硬质、半硬质、聚氨酯泡沬制品的专家。适用于石油管道保温、建材保温、大型冷库保温,风力发电设备等.我厂生产的低压灌注机是引进国外先进技术,新型研制开发的新设备。具有计量准确、混合均匀、性能可靠、自动化成度高等优点。整机选用国内外各家基础元件,维护方便.各组原液压力、泵速、温度全部使用数字化显示其数据.可在不停机状况下进行工艺需求的调整。

二、 性能与规格

1、 机械化自动化程度高:

2、 浇注时间PLC系统自动控制,浇注量精确,可输入100个控制点,满足100个不同规格制品要求。采用单个按钮操作,工位自动跟踪“动作准确、操作灵便“

1)浇注头结构先进.采用球阀式注料机构,经久耐用,使原液注射动作完全一致

2)原料罐容积400L采用夹层式保温,料罐内胆采用8304不锈钢板制作及自动控制电机驱动搅拌器,

3)原料罐加热、制冷,温度自动调节,夹层保温,使全管路料温保持稳定.

4)计量泵转速采用变频调节装置及高精度、高耐磨的计量泵,流量500g-2500g/s。流量自动调节方便、计量准确。

三、LD-602D-Z系列聚氨酯低压发泡机主要持性:

1、混合头:新型的注料阀门。吐出精确同步、不堵塞、混合均匀、拆洗方便、快捷。

2、 计量泵:使用高精度计量泵,变频电机驱动、配比调整范围广,品质可靠。

3、 系统:触摸屏电脑控制,程序自动化跟踪、注量控制点100个,并有温度、力、转速、清洗等先进系统.

4、低压电器:采用世界知名品牌。

5、自动行走作业,方便大型产品的生产。

6、热交换器:精确控制原液温度,精确度为±1℃。


Humanized design, automatic running operation.

First,Overview

LD-602D-Z series of polyurethane perfusion machine is the production of hard, half hard expert, polyurethane foam products. Applicable to the petroleum pipeline insulation, thermal insulation building material, large cold storage insulation, wind power generation equipment. Low pressure pouring machine produced by our factory is the introduction of foreign advanced technology, new equipment development model development. With accurate
measuring, mixing, reliable performance, high degree of automation. The selection of domestic and foreign various infrastructure components,convenient maintenance, the liquid pressure, pump speed, temperature, all of the use of digital display its data, can process requirements in the non-stop condition adjustment.

Second.Performance and specifications

1 .Automation machinery high;

2.Pouring time control system using delta PLC. pouring quantity, can enter the 100 control points, to meet the requirements of different specifications products 100. With a single button operation, automatic tracking. Action is accurate, convenient operation.

1).The pouring head of advanced structure, the ball valve type feeding mechanism, durable, so liquid injection action completely consistent.

2).The raw material tank volume of 400L. the sandwich type insulation, tank container adopts SUS304 stainless steel plate production and automatic control motor driven stirrer.

3).Tank heating, refrigeration, temperature automatic adjustment,interlayer insulation, the material temperature stable.

4).Metering pump metering pump adopts frequency conversion speed regulating device and high precision, high abrasion resistance. Automatic flow regulating convenient, accurate measurement.

Third,The main characteristics of LD-602D-Z series polyurethane low pressure foaming machine:

1.The mixing head: feeding valve model. Spit out the precise synchronization, no blockage, mixed evenly, and convenient, fast.

2.Metering pump: use high precision metering pump, frequency conversion motor drive ratio, wide adjusting range, reliable quality.

3,System: the touch screen computer control, tracking, injection quantity control pointlOO process automation, and temperature, pressure, speed,cleaning and other advanced systems.

4,Low voltage electrical appliances: the world famous

5,Automatic running operation,convenient large-scale production.

6, Heat exchanger:precise control of solution temperature 1℃,accuracy of ±1℃.


聚氨酯设备|全自动生产线|高压发泡机|低压发泡机|弹性体浇注机